Universal 7-in-1 42V 2A Scooter & E-Mobility Charger
One charger, seven connectors. Fast, safe, and widely compatible with most 10S lithium-ion e-scooters and rideables. Input 100–240VAC, Output 42V 2A. Not for lead-acid batteries.
Key Features
DC 5.5×2.1/2.5mm, 8mm RCA, 9mm airline 3-pin, 12mm airline 3-pin, XLR, 9mm 1-pin.
Optimized for 10S Li-ion packs. Red/green LED shows charging/ready states.
Over-voltage, over-current, overload, over-temp, short-circuit, and auto-recovery protection.
Fire-retardant ABS shell, aluminum heat sink, alloy plug shells, pure-copper cores, active cooling fan.
Wide-range input 100–240VAC, 50/60Hz for home, office, or travel.
Up to 84W max power for efficient turnarounds versus 1A trickle chargers.
Wide Compatibility
Designed for many popular 36V (10S) lithium-ion scooters and rideables. Works with brands/models such as: Jetson, Razor, Swagtron, Bird, Gotrax, Segway, Lime, Xiaomi, MiniPro, Highboy, ES3, Ninebot, Sisigad and more.
What’s in the Box
- 42V 2A charger (100–240VAC input)
- 7-in-1 connector harness (DC 5.5×2.1/2.5, 8mm RCA, 9mm 3-pin, 12mm 3-pin, XLR, 9mm 1-pin)
- User guide
Technical Specifications
| Input | AC 100–240V, 50/60Hz |
| Output | 42V DC, 2A (max 84W) |
| Battery Type | 10S Lithium-ion (not for lead-acid) |
| Shell/Hardware | Fireproof ABS, aluminum heat sink, alloy plugs, copper cores |
| Cooling | Active fan (audible during operation) |
| Status LED | Red = charging; Green = full / disconnected |
| Color | Black |
Safe-Use Guidelines
- Connect battery first, then plug into AC. When finished, unplug AC first, then disconnect battery.
- Use in a dry, ventilated area. Do not cover the charger while operating.
- Confirm your battery spec is 42V/2A compatible; charging time should not exceed 24 hours.
- Do not attempt to charge lead-acid or non-compatible chemistries.
- A gentle fan sound is normal and helps heat dissipation.
FAQs
Will this work with my scooter?
If your pack is 36V nominal (42V charge) lithium-ion and your connector matches one of the included tips, it’s likely compatible. Always verify polarity and specs.
What does the LED mean?
Red = charging. Green = fully charged, disconnected, or not drawing current.
Why can I hear a fan?
The internal fan is part of the cooling system and may be audible—this is normal.
Can I use this on lead-acid batteries?
No. This charger is for 10S lithium-ion batteries only.